笔芯划线仪中英文简介:
依据标准:QB/T 2777-2015记号笔、 QB/T 2776-2006圆珠笔和笔芯
According to the standard :QB/T2777-2015 Marker pen
功能简介:
HM-7012画圆书写机可用于检测圆珠笔、中性笔笔芯、能检测笔芯初写性能,出墨量,划线长度,笔头磨耗性等书写性能指标,也可检测墨水的书写质量,是笔厂,笔芯厂,墨水厂不可缺少的检测设备.
HM-7012 Drawing circular writing machine can be used to detectballpoint pens, Neutral pen refill, can detect the pen core writeperformance,ink volume, dash length, written wear and other writingperformance indicators,can also detect ink writing quality, penfactory, Pen core factory, Ink factory ndispensable testing
主要参数 MainParameters:
1.测试笔数Numberof test pens:10支
2.测试直径Test diameter:≦10mm
3.笔芯自转速度:0-3转/min,该速度设置为0转即可关闭自转功能
Pen Core rotation peed:0-3 rpm ,Set the speed to zero toturn off the rotation function
4.笔往复运动:行程100mm
5.书写速度:1-12m/min (数字输入设定,可至0.1m)Writing speed:1-12m/min(Digitalinput Settings, Up to 0.1m)
6.走纸速度:0-1000mm/min(数字输入设定)Paper speed:0-1000mm/min(Digitalinput Settings)
7.书写角度:60-90°可调,需在待机状态下手动调节
Writing angle:60-90 °is adjustable Manual adjustment is requiredin standby mode。
8.书写长度Writing length:0-2000m
9.书写间距:1-4mm可调Writing spacing: 1-4 mm is adjustable
10.提醒功能:测试完毕后仪器自动停止(笔架自动抬起)
Remind function:The instrument automatically when the testis finished (the pen holder automatically lifts)
11.收纸功能:仪器自带收纸 Paper receiver function:The instrumentcomes with the receiving paper
12.控制系统:PLC触摸屏+伺服马达控制
13.电压Voltage:220V 50HZ
14.打包木箱尺寸Packing wooden case size:111*91*61cm
15.重量:约100Kg(以实际为准) Weight:About 100Kg(Subject toactual)
附件Attachment:
1. 仪器中文操作说明书一份 Onecopy of theinstrument Chinese Operation manual
2. 仪器保修卡一份 Instrument Warranty Card One copy
3. 专用书写纸2卷(380*110mm) DedicatedWriting paper 2 rolls
4. 坠纸棒一根 A piece of falling paper stick
5. 卷纸芯一个 Roll Paper CoreOne
弘铭仪器连续划圆书写机大量现货
产品概述:本机本仪器测试笔在一定的划线长度内线迹流畅,不出现变淡、断线等现象。
符合标准: QB/T1655-2006,QB/T1655-2006
技术参数:
1.可测试样数:10支
2.划线痕迹:所划“○”大小可自由调整
3.书写载荷: 0.98 N (可定制)
4.书写速度: 5±0.5 m/min(1~10m/min可调)
5.书写角度:65°±5°(50~90°可调)
6.书写长度: 1~10000m 自由设定
7.走纸速度: 1~1000 mm/min可调
8.收纸功能:自动收纸,无需专人值守
9.体积(W×D×H): 95×55×48cm
10.重量: 90 Kg
11.电源: AC220V50HZ
附件:
1. 仪器中文说明书一份。
2. 仪器保修卡一份。
连续划圆书写机出色的精准度
“笔尖难题”困扰中国制笔行业已久,我们还不具备生产模具钢的能力,包括圆珠笔头上的‘圆珠’,目前仍然需要进口。这都需要调整结构。一支小圆珠笔也反映出中国制造的软肋,经过五年数不清的失败,在电子显微镜下,太钢集团终于看到了“添加剂”分布均匀的笔尖钢,试验在2016年9月取得成功。大规模炼钢十多次后,头批切削性好的钢材终于出炉了。中国第一次解决了笔尖难题,国产的笔芯装上我们自己的笔尖,再加上我司的连续划圆书写机使中国制造更上一层楼。弘铭仪器专业生产连续划圆书写机